Welcome Guest Search | Active Topics | Log In | Register

Snom 300 Options
DarylB
#1 Posted : Monday, August 17, 2009 3:35:27 PM

Rank: Soho66 Staff Member

Groups:

Joined: 7/9/2009
Posts: 60

NOTE: Please refer to the new guide on the following page when setting up your phone - http://soho66.co.uk/9666.../1/Hardware-Phones.aspx

Configuring your VoIP handset

This article describes the settings used for the SNOM 300 to connect to the Soho66 VoIP service.

* Ensure your phone is connected to the internet and power socket
* Press the down arrow button until "Information IPAdr" is displayed on the phone
* Press the tick button to see the IP address
* Using a PC on the same network, type the IP address (from the screen display on the phone) in the URL of your browser
* Choose Identity 1 in the left hand menu

To configure your phone via your web browser, you will need to following details:
Server Your Soho66 VoIP Domain Setting (see below)
User name Your Soho66 VoIP Username (see below)
Password Your Soho66 VoIP password (see below)
Transport type UDP
Port 5060

Your Soho66 VoIP Username, VoIP Password and VoIP Domain settings for your device can be found by clicking on the relevant number or extension in Your numbers

* Fill in "Account" with your Soho66 VoIP Username from your number settings page in My Soho
* Fill in "Password" with your Soho66 VoIP Password from your number settings page in My Soho
* Fill in "Registrar" with the Soho66 VoIP Domain setting from your number settings page in My Soho
* Leave the Outbound Proxy blank
* Fill in "Authentication Username" with your Soho66 VoIP Username from your number settings page in My Soho
* Click the Save button
* Click on the SIP tab above the login details.
* Change the "Proposed Expiry" to 1 min
* Click the Save button again

Please not that this is the minimum information required to configure your phone.
JefferyW
#2 Posted : Monday, November 26, 2012 8:47:39 AM
Rank: Newbie

Groups:

Joined: 8/19/2011
Posts: 1
Is it possible to use the BLF feature on the SNOM 320/360/370 etc. I have tried to configure it but it doesn't seem to work.

Also you might want to add the setting for the dialplan to allow the missed calls feature to work:

Go to your Identity, select SIP tab and paste the following into the SIP Dialplan section:

|^sip:([0-9]*)@.*|sip:\1@\d;phone=yes|

Otherwise the calls will not work as it will try and use the incoming call server eg: barbie.soho66.co.uk etc for making the call, the above dialplan strips just the numeric content from the incoming call to allow you to not get a 401 server error trying to call back a missed, received call.
Users browsing this topic
Guest (2)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Soho66 Theme by Daryl Burns (Soho66) (Soho66)
Powered by YAF 1.9.3 | YAF © 2003-2009, Yet Another Forum.NET
This page was generated in 3.379 seconds.