Prerequisites
PLEASE NOTE: Some Mobile Network Operators restrict the use of VoIP functionality on their network. If this occurs, you will receive the SIP response code '488 Not Acceptable here'. If you have any questions regarding this, please give us a call on 03333 443 443, option 1 or email support@soho66.co.uk.
Before you start, you will need to know your VoIP username, VoIP password and SIP server that your number is connected to. You can do this from your Soho66 account by clicking on "My Soho", then "Your Numbers", then the telephone number that you're connecting the adapter to.
Enabling Web Configuration
Pick up the phone connected to the adapter and dial ***. You will most likely hear "E103E". If so, press the # button on the phone to be taken to the menu. When you're asked to choose a menu option, dial 12. You will hear "WAN Port Web Access" followed by either "Enabled", or "Disabled". If the device reads "Disabled", then press 9 to change to "Enabled" and press #. You will then need to reboot the device by dialling 99#
Finding your adapter's IP Address
The configuration of your device is handled through a web-browser. To access this, you will need the IP address of the adapter. This is discovered using the adapter's IVR menu:
Pick up the phone connected to the adapter and dial ***. Press # if you hear E103E, then Dial 02 and your adapter will read out its current IP address.
Log in to the adapter
To log in to your adapter open your web browser and, in the address bar, type in http://IPAddress and press Enter (replacing IPAddress with the IP address read out to you in the previous step). This will present you with the Grandstream Login page. The default password for configuring the Grandstream devices is "admin".
Configuring your adapter
After logging in, click the "Advanced Settings" tab, and set the following details so that caller ID is handled by your phone.
FXS Impedance: UK/New Zealand #2 (370 Ohm + 620 Ohm||310nF)
Caller ID Scheme: ETSI-FSK (France, Germany, Norway, Taiwan, UK-CCA)
Onhook Voltage: 36V
Polarity Reversal: No
Scroll down to the bottom of the page and click "Update". This will save the settings in the adapter, then advise you that your device needs to be rebooted. Ignore this for the time being.
Now, click FXS Port and enter the following details:
- Primary SIP Server: sbc.soho66.co.uk:8060
- SIP User ID: This is your VoIP Username
- Authenticate ID: This is also your VoIP Username
- Authenticate Password: This is your VoIP Password
- Name: This is the name that will display on other phones on your account when you dial them.
- Local SIP Port: 8061
Scroll down to the bottom of the page and click "Update". This time, when prompted, click the Reboot Now link. Once your adapter has rebooted, you should then be connected to your Soho66 number.
